Six new wedges for improved chipping, pitching and short game shots.

1 of 6 Schecter Lee
$129 eidolongolf.com Made of: Cast 8620 carbon steel Loft/bounce(s): 48°/15° and 3°, 52°/18° and 3°, 56°/30° and 7°, 60°/25° and 6° The "V-sole" is designed with two distinct bounce angles. Its leading edge has high degrees of bounce so the club won't dig into the turf. Reduced bounce angle toward the rear allows for greater versatility from tight lies. Clubface and grooves are machine-milled, for maximum allowable groove volume. Available in steel or graphite shafts, to match the rest of your iron set.
2 of 6 Schecter Lee
$89 forgolfersonly.com Made of: Cast 8620 carbon steel Loft/bounce: 46°/4°, 46°/8°, 48°/6°, 48°/10°, 50°/6°, 50°/10°, 52°/8°, 52°/12°, 54°/10°, 54°/14°, 56°/8°, 56°/14°, 58°/10°, 58°/16°, 60°/8°, 60°/16°, 64°/8°, 64°/16° Heavier head enhances feel. Softer shaft flex for smooth feedback and higher-spinning shots.Thick top line and higher center of gravity increases spin on full shots. Milled face and grooves go through a process that softens the groove edges to reduce damage to the cover of your ball. Company stamps your initials on custom orders at no additional charge.
3 of 6 Scheter Lee
$109 macgregorgolf.com Made of: Forged 1025 carbon steel Loft/bounce: 50°/6°, 52°/6°, 54°/10°, 56°/10°, 56°/12°, 58°/10°, 60°/8°, 60°/12° Sole relief along the heel and toe make these versatile (easy to open up the face) on short pitches. Better players should appreciate the squarish head, slight onset and high toe. Designer Don White has been crafting clubs for 35-plus years. Choice of two finishes: dark gunmetal (pictured) or satin chrome.
4 of 6 Schecter Lee
$169 or higher, depending on shaft miuragolf.com Made of: Forged carbon steel Loft/bounce: 52°/6°, 56°/9°, 60°/7° Hosel-less head, made from a single steel billet, is stamped under pressure more than other forgings to produce a tighter grain structure and softer feel. Milled hosel (separate piece) attaches to head through friction, or "spin-welding." Heel-and-toe sole relief and a rolled trailing edge provide versatility. Head treatment is applied so the finish "ages" rather than rusts. Custom grind by owner's son, Yoshitaka Miura.
5 of 6 Schecter Lee
$119 taylormadegolf.com Made of: Cast stainless steel Loft/bounce: 52°/8°, 54°/10°, 56°/12°, 58°/8°, 60°/6° "Z-grooves" have sharper edges and 10 percent larger volume than "Y-grooves." They also produce higher spin rates (by 200 to 300 rpm) out of the rough. There's no discernable difference from fairway lies. Two rear "feel" pockets distribute vibration across the head, to heighten feel. The "C-grind" sole makes it easy to lay open the face for flop shots. Dark, smoky finish reduces glare.
6 of 6 Schecter Lee
$129 touredge.com Made of: Stainless steel body, forged carbon-steel face Loft/bounce: 50°/8°, 52°/8°, 54°/12°, 56°/12°, 58°/10°, 60°/8° Hollow head is filled with elastomer gel to soften impact feel. Milled, thin face insert (1.5 mm) is said to provide added control. Removable screw in the rear allows you to adjust swingweight. Head comes with a 2-gram, red aluminum screw (D5 swingweight). Make it heavier with the 4-gram steel screw (D6.5) or 6-gram tungsten screw (D8).